Version bump

.gitea/workflows/build.yaml

@@ -14,7 +14,7 @@ jobs:
       - name: install meson
         run: apt-get -yq install meson
       - name: Install build dependencies
-        run: apt-get -yq install libusb-1.0-0-dev libpango1.0-dev libcairo2-dev gcovr
+        run: apt-get -yq install libusb-1.0-0-dev libspdlog-dev libfmt-dev libpango1.0-dev libcairo2-dev gcovr
       - name: get build environment versions
         run: |
           echo "=== Start meson version ==="
@@ -32,25 +32,21 @@ jobs:
           echo "=== Start dependency package version ==="
           apt-cache policy libpango1.0-dev
           apt-cache policy libcairo2-dev
+          apt-cache policy libfmt-dev 
+          apt-cache policy libspdlog-dev
           apt-cache policy libusb-1.0-0-dev
           echo "=== End dependency package version ==="
-      - name: Build ptprnt debug
-        run: scripts/build.sh debug --coverage --test
-      - name: Generate coverage
-        run: scripts/generate_coverage.sh --text
+      - name: setup builddir
+        run: meson setup builddir -Db_coverage=true
+      - name: build and test dist package
+        run: ninja -C builddir dist
+      - name: calculate coverage
+        run: ninja -C builddir coverage-text
       - name: Coverage report
-        run: cat ./coverageReport/coverage.txt
-      - name: build release
-        run: scripts/build.sh release
-      - name: upload release binary
+        run: cat ./builddir/meson-logs/coverage.txt
+      - name: upload dist package
         uses: actions/upload-artifact@v3
         with:
-          name: ptprnt
-          path: ./builddir/ptprnt
-          if-no-files-found: error
-      - name: upload coverage report
-        uses: actions/upload-artifact@v3
-        with:
-          name: coverage.txt
-          path: ./coverageReport/coverage.txt
+          name: ptprnt-dist
+          path: ./builddir/meson-dist/*
           if-no-files-found: error

.gitignore

@@ -1,5 +1,5 @@
 # Folder
-builddir*/
+builddir/
 subprojects/*
 .cache/
 coverageReport/

README.md

@@ -2,33 +2,9 @@
 
 A command-line label printer driver for Brother P-touch printers on Linux. Prints text labels directly from your terminal.
 
-## Example
-
-Too print a label, provide your text and optionally a font and a font size. This command will print the label below on a Brother P-Touch P700:
-
-```bash
-ptprnt --font "NotoMono Nerd Font" --fontsize 32 --text "🖶 ptprnt v0.2.0 🥰"
-```
-
-![Printed label that proudly reads 🖶 ptprnt v0.2.0 🥰](docs/assets/label_print_v0_2_0.jpg)
-
 ## Quick Start
 
-## Quick Start
-
-**Binary dependencies**
-
-Arch Linux:
-```bash
-pacman -S pango cairo libusb 
-```
-
-Debian/Ubuntu:
-```bash
-apt install libpangocairo-1.0-0 libusb-1.0-0
-```
-
-**Build dependencies:**
+**Install dependencies:**
 
 Arch Linux:
 ```bash
@@ -37,162 +13,17 @@ pacman -S libusb spdlog pango cairo meson
 
 Debian/Ubuntu:
 ```bash
-apt install libusb-1.0-0-dev libspdlog-dev libfmt-dev libpango1.0-dev libcairo2-dev meson
+apt-get install libusb-1.0-0-dev libspdlog-dev libfmt-dev libpango1.0-dev libcairo2-dev meson
 ```
 
-Note: spdlog is built as a subproject and statically linked, so it's not required as a system dependency.
-
 **Build and run:**
 Clone this repository first and enter the directory. Then build:
 ```bash
-# Using the build script (recommended)
-./scripts/build.sh release
-builddir/ptprnt --help
-
-# Or manually with meson
 meson setup builddir
 ninja -C builddir
 builddir/ptprnt --help
 ```
 
-## Usage
-
-### Basic Text Printing
-
-Print a simple label with text:
-```bash
-ptprnt --text "Hello World"
-```
-
-### Formatting Options
-
-Control the appearance of your labels with these options:
-
-- `--font FONT_NAME` - Set the font (e.g., "NotoMono Nerd Font", "DejaVu Sans")
-- `--fontsize SIZE` - Set font size in points (default: 24)
-- `--halign ALIGNMENT` - Horizontal alignment: `left`, `center`, `right` (default: center)
-- `--valign ALIGNMENT` - Vertical alignment: `top`, `center`, `bottom` (default: center)
-
-**Example with formatting:**
-```bash
-ptprnt --font "DejaVu Sans Mono" --fontsize 28 --halign left --text "Left aligned text"
-```
-
-### Multiple Text Elements
-
-You can add multiple text elements to a single label. Formatting options apply to all subsequent `--text` arguments until changed:
-
-```bash
-ptprnt \
-  --font "DejaVu Sans" --fontsize 32 --text "Large Title" \
-  --fontsize 18 --text "Smaller subtitle"
-```
-
-### Multiple Labels (Stitching)
-
-Create multiple labels that will be stitched together horizontally using the `--new` flag:
-
-```bash
-ptprnt \
-  --text "Label 1" \
-  --new \
-  --text "Label 2" \
-  --new \
-  --text "Label 3"
-```
-
-Each `--new` starts a fresh label. The labels are automatically stitched together with 60 pixels of spacing.
-
-**Example - Creating a series of address labels:**
-```bash
-ptprnt \
-  --font "DejaVu Sans" --fontsize 20 \
-  --text "Peter Lustig" --text "Am Bauwagen 1" \
-  --new \
-  --text "Donald Duck" --text "Blumenstraße 13" \
-  --new \
-  --text "Homer Simpson" --text "742 Evergreen Terrace"
-```
-
-**Example - Mixed formatting across labels:**
-```bash
-ptprnt \
-  --fontsize 32 --text "BIG" \
-  --new \
-  --fontsize 16 --text "small" \
-  --new \
-  --fontsize 24 --text "medium"
-```
-
-### Printer Selection
-
-By default, ptprnt auto-detects your printer. You can explicitly select a printer:
-
-```bash
-ptprnt --printer P700 --text "Hello"
-```
-
-List all available printer drivers:
-```bash
-ptprnt --list-all-drivers
-```
-
-### Testing with Fake Printer
-
-Before printing to your real printer, you can test your label output using the built-in fake printer. This generates a PNG image file instead of printing:
-
-```bash
-ptprnt --printer FakePrinter --text "Test Label"
-```
-
-This will create a file named `fakelabel_YYYYMMDD_HHMMSS.png` in your current directory with a preview of your label. Use this to:
-- Verify text formatting and layout
-- Test multi-label stitching
-- Preview before wasting label tape
-
-**Example workflow:**
-```bash
-# First, test your label design
-ptprnt --printer FakePrinter \
-  --font "DejaVu Sans" --fontsize 28 \
-  --text "Test Design" --text "Check Layout"
-
-# View the generated PNG file to verify
-# If satisfied, print to real printer
-ptprnt --printer P700 \
-  --font "DejaVu Sans" --fontsize 28 \
-  --text "Test Design" --text "Check Layout"
-```
-
-### Verbose Output
-
-Enable detailed logging for debugging:
-
-```bash
-ptprnt --verbose --text "Debug mode"
-```
-
-Enable USB trace to see raw USB communication:
-```bash
-ptprnt --trace --text "USB trace mode"
-```
-
-### Complete Example
-
-An example using a mixed bag of features:
-
-```bash
-ptprnt \
-  --verbose \
-  --printer P700 \
-  --font "NotoMono Nerd Font" \
-  --fontsize 28 --halign center --text "Product Label" \
-  --fontsize 20 --text "SKU: 12345" \
-  --new \
-  --fontsize 24 --text "Backup Label" \
-  --fontsize 18 --text "Date: 2025-10-16"
-```
-
 ## Supported Printers
 (I need more printers for verification 😉)
 
@@ -202,50 +33,17 @@ ptprnt \
 
 This is a modern C++20 rewrite of [ptouch-print](https://git.familie-radermacher.ch/linux/ptouch-print.git). Credits to Dominic Rademacher for reverse engineering the USB protocol.
 
-**Build script:**
-```bash
-# Release build (tests disabled for faster builds)
-./scripts/build.sh release
-
-# Debug build (tests enabled)
-./scripts/build.sh debug
-
-# Debug with tests
-./scripts/build.sh debug --test
-
-# Debug with coverage
-./scripts/build.sh debug --coverage
-
-# Clean all build directories
-./scripts/build.sh clean
-
-# Show all options
-./scripts/build.sh --help
-```
-
-**Note:** Tests are only built in debug mode to keep release builds fast and small. Release builds do not include test binaries or link against gtest/gmock.
-
 **Running tests:**
 ```bash
-# Using build script
-./scripts/build.sh --test
-
-# Or manually
 ninja -C builddir test
 ```
 
 **Coverage reports:**
 ```bash
-# 1. Build with coverage enabled and run tests
-./scripts/build.sh debug --coverage --test
-
-# 2. Generate coverage reports
-./scripts/generate_coverage.sh              # All formats (html, xml, text)
-./scripts/generate_coverage.sh --html       # HTML only
-./scripts/generate_coverage.sh --text       # Text only
-./scripts/generate_coverage.sh --xml        # XML only (for CI/CD)
-./scripts/generate_coverage.sh --html --xml # HTML and XML
-
+meson setup builddir -Db_coverage=true
+ninja -C builddir
+ninja -C builddir test
+ninja -C builddir coverage-text
 ```
 
 ## License

generate_coverage.sh

@@ -0,0 +1,27 @@
+#!/bin/bash
+
+SCRIPT_PATH="$( cd -- "$(dirname "$0")" >/dev/null 2>&1 ; pwd -P )"
+HTML_COV_PATH="coverageReport/html"
+XML_COV_PATH="coverageReport/xml"
+HTML_START_FILE="index.html"
+
+echo "Generating Coverage report for ptprnt"
+
+ninja -C builddir
+ninja -C builddir test
+
+mkdir -p ${HTML_COV_PATH}
+gcovr --html --html-details --html-syntax-highlighting --filter src --output ${HTML_COV_PATH}/${HTML_START_FILE}
+
+mkdir -p ${XML_COV_PATH}
+gcovr --xml-pretty --filter src --output ${XML_COV_PATH}/cov.xml
+
+if [ $? ] 
+then
+  echo "Coverage report successful generated!"
+  echo "Open: file://${SCRIPT_PATH}/${HTML_COV_PATH}/${HTML_START_FILE}"
+else
+  echo "Error generating coverage report!"
+fi
+
+rm *.gcov

meson.build

@@ -20,16 +20,10 @@ project(
 )
 
 usb_dep = dependency('libusb-1.0')
+log_dep = dependency('spdlog')
+fmt_dep = dependency('fmt')
 pangocairo_dep = dependency('pangocairo')
 
-# spdlog with std::format (C++20) - static library
-spdlog_proj = subproject('spdlog', default_options: ['std_format=enabled', 'default_library=static', 'compile_library=true'])
-log_dep = spdlog_proj.get_variable('spdlog_dep')
-
-if not log_dep.found()
-    error('spdlog not found, can not proceed')
-endif
-
 # CLI11
 cli11_proj = subproject('cli11')
 cli11_dep = cli11_proj.get_variable('CLI11_dep')
@@ -56,27 +50,20 @@ ptprnt_exe = executable(
     'ptprnt',
     'src/main.cpp',
     install: true,
-    dependencies: [usb_dep, log_dep, pangocairo_dep, cli11_dep],
+    dependencies: [usb_dep, log_dep, fmt_dep, pangocairo_dep, cli11_dep],
     include_directories: incdir,
     sources: [ptprnt_srcs],
     cpp_args: cpp_args,
 )
 
 ### Unit tests
-# Only build tests for debug builds or when explicitly enabled
-build_tests = get_option('buildtype') == 'debug' or get_option('build_tests')
 
-if build_tests
-    # GTest and GMock
-    gtest_proj = subproject('gtest')
-    gtest_dep = gtest_proj.get_variable('gtest_main_dep')
-    gmock_dep = gtest_proj.get_variable('gmock_main_dep')
-    if not gtest_dep.found()
-        error('MESON_SKIP_TEST: gtest not installed.')
-    endif
+# GTest and GMock
+gtest_proj = subproject('gtest')
+gtest_dep = gtest_proj.get_variable('gtest_main_dep')
+gmock_dep = gtest_proj.get_variable('gmock_main_dep')
+if not gtest_dep.found()
+    error('MESON_SKIP_TEST: gtest not installed.')
+endif
 
-    subdir('tests')
-    message('Tests enabled (buildtype=' + get_option('buildtype') + ')')
-else
-    message('Tests disabled (use debug build or -Dbuild_tests=true to enable)')
-endif
+subdir('tests')

meson_options.txt

@@ -2,8 +2,3 @@ option('usb_trace_only',
   type: 'boolean',
   value: false,
   description: 'Enable USB trace mode: log USB data without sending to device (saves label tape during debugging)')
-
-option('build_tests',
-  type: 'boolean',
-  value: false,
-  description: 'Build unit tests (automatically enabled for debug builds)')

scripts/build.sh

@@ -1,162 +0,0 @@
-#!/bin/bash
-
-# Build script for ptprnt - simplifies common build configurations
-# Usage: ./scripts/build.sh [release|debug|clean] [options]
-
-set -e
-
-SCRIPT_PATH="$( cd -- "$(dirname "$0")" >/dev/null 2>&1 ; pwd -P )"
-PROJECT_ROOT="${SCRIPT_PATH}/.."
-
-# Color output
-RED='\033[0;31m'
-GREEN='\033[0;32m'
-YELLOW='\033[1;33m'
-BLUE='\033[0;34m'
-NC='\033[0m' # No Color
-
-print_usage() {
-    echo "Usage: $0 [build-type] [options]"
-    echo ""
-    echo "Build Types:"
-    echo "  release    Build optimized release version (default)"
-    echo "  debug      Build debug version with symbols"
-    echo "  clean      Clean build directories"
-    echo ""
-    echo "Options:"
-    echo "  --coverage Enable coverage reporting (debug builds only)"
-    echo "  --reconfigure  Force reconfiguration"
-    echo "  --test     Run tests after building"
-    echo "  -j N       Use N parallel jobs (default: auto)"
-    echo ""
-    echo "Examples:"
-    echo "  $0                    # Build release"
-    echo "  $0 debug --test       # Build debug and run tests"
-    echo "  $0 debug --coverage   # Build debug with coverage"
-    echo "  $0 clean              # Clean all build directories"
-}
-
-# Default values
-BUILD_TYPE="release"
-BUILDDIR="builddir"
-COVERAGE=false
-RECONFIGURE=false
-RUN_TESTS=false
-JOBS=""
-
-# Parse arguments
-while [[ $# -gt 0 ]]; do
-    case $1 in
-        release|debug|clean)
-            BUILD_TYPE="$1"
-            shift
-            ;;
-        --coverage)
-            COVERAGE=true
-            shift
-            ;;
-        --reconfigure)
-            RECONFIGURE=true
-            shift
-            ;;
-        --test)
-            RUN_TESTS=true
-            shift
-            ;;
-        -j)
-            JOBS="-j $2"
-            shift 2
-            ;;
-        -h|--help)
-            print_usage
-            exit 0
-            ;;
-        *)
-            echo -e "${RED}Error: Unknown option: $1${NC}"
-            print_usage
-            exit 1
-            ;;
-    esac
-done
-
-cd "${PROJECT_ROOT}"
-
-# Handle clean
-if [[ "${BUILD_TYPE}" == "clean" ]]; then
-    echo -e "${YELLOW}Cleaning build directories...${NC}"
-    rm -rf builddir builddir-debug
-    echo -e "${GREEN}Clean complete!${NC}"
-    exit 0
-fi
-
-# Set build directory and options based on build type
-if [[ "${BUILD_TYPE}" == "debug" ]]; then
-    BUILDDIR="builddir-debug"
-    MESON_OPTS="--buildtype=debug"
-
-    if [[ "${COVERAGE}" == true ]]; then
-        MESON_OPTS="${MESON_OPTS} -Db_coverage=true"
-        echo -e "${BLUE}Building debug with coverage enabled${NC}"
-    else
-        echo -e "${BLUE}Building debug version${NC}"
-    fi
-else
-    BUILDDIR="builddir"
-    MESON_OPTS="--buildtype=release"
-
-    if [[ "${COVERAGE}" == true ]]; then
-        echo -e "${YELLOW}Warning: Coverage is only supported for debug builds, ignoring --coverage${NC}"
-    fi
-
-    if [[ "${RUN_TESTS}" == true ]]; then
-        echo -e "${YELLOW}Warning: Tests are not built for release builds (use debug build for testing)${NC}"
-        RUN_TESTS=false
-    fi
-
-    echo -e "${BLUE}Building release version (tests disabled)${NC}"
-fi
-
-# Setup or reconfigure build directory
-if [[ ! -d "${BUILDDIR}" ]] || [[ "${RECONFIGURE}" == true ]]; then
-    if [[ "${RECONFIGURE}" == true ]]; then
-        echo -e "${YELLOW}Reconfiguring build...${NC}"
-        meson setup "${BUILDDIR}" ${MESON_OPTS} --wipe --reconfigure
-    else
-        echo -e "${YELLOW}Setting up build directory...${NC}"
-        meson setup "${BUILDDIR}" ${MESON_OPTS}
-    fi
-fi
-
-# Build
-echo -e "${YELLOW}Building...${NC}"
-ninja -C "${BUILDDIR}" ${JOBS}
-
-if [[ $? -eq 0 ]]; then
-    echo -e "${GREEN}Build successful!${NC}"
-    echo -e "Binary: ${BUILDDIR}/ptprnt"
-else
-    echo -e "${RED}Build failed!${NC}"
-    exit 1
-fi
-
-# Run tests if requested
-if [[ "${RUN_TESTS}" == true ]]; then
-    echo -e "${YELLOW}Running tests...${NC}"
-    ninja -C "${BUILDDIR}" test
-
-    if [[ $? -eq 0 ]]; then
-        echo -e "${GREEN}All tests passed!${NC}"
-    else
-        echo -e "${RED}Tests failed!${NC}"
-        exit 1
-    fi
-fi
-
-# Show binary info
-echo ""
-echo -e "${BLUE}Build Information:${NC}"
-echo "  Build type: ${BUILD_TYPE}"
-echo "  Build dir:  ${BUILDDIR}"
-echo "  Binary:     $(ls -lh ${BUILDDIR}/ptprnt | awk '{print $5, $9}')"
-echo ""
-echo -e "${GREEN}Done!${NC}"

scripts/generate_coverage.sh

@@ -1,195 +0,0 @@
-#!/bin/bash
-
-# Coverage report generator for ptprnt
-# Usage: ./scripts/generate_coverage.sh [options]
-
-set -e
-
-SCRIPT_PATH="$( cd -- "$(dirname "$0")" >/dev/null 2>&1 ; pwd -P )"
-PROJECT_ROOT="${SCRIPT_PATH}/.."
-
-# Output paths
-HTML_COV_PATH="coverageReport/html"
-XML_COV_PATH="coverageReport/xml"
-TEXT_COV_PATH="coverageReport"
-HTML_START_FILE="index.html"
-
-# Color output
-RED='\033[0;31m'
-GREEN='\033[0;32m'
-YELLOW='\033[1;33m'
-BLUE='\033[0;34m'
-NC='\033[0m' # No Color
-
-# Default values - all formats enabled by default
-GENERATE_HTML=false
-GENERATE_XML=false
-GENERATE_TEXT=false
-BUILDDIR="builddir-debug"
-
-# Common gcovr options
-GCOVR_OPTS="--filter src --root ."
-
-print_usage() {
-    echo "Usage: $0 [options]"
-    echo ""
-    echo "Coverage Report Generator - generates coverage reports from existing coverage data"
-    echo ""
-    echo "Prerequisites:"
-    echo "  Build with coverage enabled first:"
-    echo "    ./scripts/build.sh debug --coverage --test"
-    echo ""
-    echo "Format Options (if none specified, all formats are generated):"
-    echo "  --html         Generate HTML coverage report"
-    echo "  --xml          Generate XML coverage report (for CI/CD)"
-    echo "  --text         Generate text coverage report (terminal output)"
-    echo ""
-    echo "Build Options:"
-    echo "  --builddir DIR Use custom build directory (default: builddir-debug)"
-    echo ""
-    echo "Other Options:"
-    echo "  -h, --help     Show this help message"
-    echo ""
-    echo "Examples:"
-    echo "  $0                        # Generate all formats (html, xml, text)"
-    echo "  $0 --html                 # Generate only HTML report"
-    echo "  $0 --html --text          # Generate HTML and text reports"
-    echo "  $0 --xml                  # Generate XML for CI/CD"
-    echo "  $0 --builddir builddir    # Use release build directory"
-}
-
-# Parse arguments
-# If no format arguments provided, enable all
-if [[ $# -eq 0 ]]; then
-    GENERATE_HTML=true
-    GENERATE_XML=true
-    GENERATE_TEXT=true
-fi
-
-while [[ $# -gt 0 ]]; do
-    case $1 in
-        --html)
-            GENERATE_HTML=true
-            shift
-            ;;
-        --xml)
-            GENERATE_XML=true
-            shift
-            ;;
-        --text)
-            GENERATE_TEXT=true
-            shift
-            ;;
-        --builddir)
-            BUILDDIR="$2"
-            shift 2
-            ;;
-        -h|--help)
-            print_usage
-            exit 0
-            ;;
-        *)
-            echo -e "${RED}Error: Unknown option: $1${NC}"
-            print_usage
-            exit 1
-            ;;
-    esac
-done
-
-# Check if any format was selected when arguments were provided
-if [[ $GENERATE_HTML == false && $GENERATE_XML == false && $GENERATE_TEXT == false ]]; then
-    echo -e "${RED}Error: No output format specified. Use --html, --xml, and/or --text${NC}"
-    print_usage
-    exit 1
-fi
-
-cd "${PROJECT_ROOT}"
-
-# Check if build directory exists
-if [[ ! -d "${BUILDDIR}" ]]; then
-    echo -e "${RED}Error: Build directory '${BUILDDIR}' does not exist${NC}"
-    echo ""
-    echo "Build with coverage enabled first:"
-    echo "  ./scripts/build.sh debug --coverage --test"
-    exit 1
-fi
-
-# Check if coverage data exists by looking for .gcda files
-if ! find "${BUILDDIR}" -name "*.gcda" -print -quit | grep -q .; then
-    echo -e "${RED}Error: No coverage data found in '${BUILDDIR}'${NC}"
-    echo ""
-    echo "Make sure you built with coverage enabled and ran the tests:"
-    echo "  ./scripts/build.sh debug --coverage --test"
-    exit 1
-fi
-
-echo -e "${BLUE}Generating Coverage report for ptprnt${NC}"
-echo "Build directory: ${BUILDDIR}"
-echo "Formats: $(${GENERATE_HTML} && echo -n "html ")$(${GENERATE_XML} && echo -n "xml ")$(${GENERATE_TEXT} && echo -n "text")"
-echo ""
-
-# Check if gcovr is available
-if ! command -v gcovr &> /dev/null; then
-    echo -e "${RED}Error: gcovr is not installed${NC}"
-    exit 1
-fi
-
-if [[ "${GENERATE_HTML}" == true ]]; then
-    echo -e "${YELLOW}Generating HTML coverage report...${NC}"
-    mkdir -p "${HTML_COV_PATH}"
-    gcovr ${GCOVR_OPTS} \
-        --html --html-details --html-syntax-highlighting \
-        --output "${HTML_COV_PATH}/${HTML_START_FILE}"
-
-    if [[ $? -eq 0 ]]; then
-        echo -e "${GREEN}✓ HTML report generated${NC}"
-        echo ""
-        echo -e "${BLUE}To view HTML report, open:${NC}"
-        echo "  file://${SCRIPT_PATH}/../${HTML_COV_PATH}/${HTML_START_FILE}"
-
-    else
-        echo -e "${RED}✗ HTML report failed${NC}"
-    fi
-fi
-
-if [[ "${GENERATE_XML}" == true ]]; then
-    echo -e "${YELLOW}Generating XML coverage report...${NC}"
-    mkdir -p "${XML_COV_PATH}"
-    gcovr ${GCOVR_OPTS} \
-        --xml-pretty \
-        --output "${XML_COV_PATH}/cov.xml"
-
-    if [[ $? -eq 0 ]]; then
-        echo -e "${GREEN}✓ XML report generated${NC}"
-          echo ""
-        echo -e "${BLUE}To view XML report, open:${NC}"
-        echo "  file://${SCRIPT_PATH}/../${XML_COV_PATH}/cov.xml"
-    else
-        echo -e "${RED}✗ XML report failed${NC}"
-    fi
-fi
-
-if [[ "${GENERATE_TEXT}" == true ]]; then
-    echo -e "${YELLOW}Generating text coverage report...${NC}"
-    mkdir -p "${TEXT_COV_PATH}"
-
-    # Save to file
-    gcovr ${GCOVR_OPTS} --output "${TEXT_COV_PATH}/coverage.txt"
-
-    if [[ $? -eq 0 ]]; then
-        echo -e "${GREEN}✓ Text report generated${NC}"
-        echo ""
-        echo -e "${BLUE}To view TXT report, open:${NC}"
-        echo "file://${SCRIPT_PATH}/../${TEXT_COV_PATH}/coverage.txt"
-    else
-        echo -e "${RED}✗ Text report failed${NC}"
-    fi
-fi
-
-# Clean up gcov files
-rm -f *.gcov 2>/dev/null
-
-# Summary
-echo ""
-echo -e "${GREEN}Coverage reports generated successfully!${NC}"
-echo ""

src/PtouchPrint.cpp

@@ -18,8 +18,7 @@
  */
 #include "PtouchPrint.hpp"
 
-#include <format>
-#include <iostream>
+#include <fmt/core.h>
 #include <spdlog/sinks/basic_file_sink.h>
 #include <spdlog/sinks/stdout_color_sinks.h>
 #include <spdlog/spdlog.h>
@@ -105,11 +104,11 @@ bool PtouchPrint::handleListDrivers() {
     auto driverFactory = std::make_unique<PrinterDriverFactory>();
     auto drivers       = driverFactory->listAllDrivers();
 
-    std::cout << "Available printer drivers:\n";
+    fmt::print("Available printer drivers:\n");
     for (const auto& driver : drivers) {
-        std::cout << std::format("  - {}\n", driver);
+        fmt::print("  - {}\n", driver);
     }
-    std::cout << "\nUse with: -p <driver_name> or --printer <driver_name>\n";
+    fmt::print("\nUse with: -p <driver_name> or --printer <driver_name>\n");
     return true;
 }
 

src/cli/CliParser.cpp

@@ -19,8 +19,7 @@
 
 #include "CliParser.hpp"
 
-#include <format>
-#include <iostream>
+#include <fmt/core.h>
 
 namespace ptprnt::cli {
 
@@ -93,7 +92,7 @@ void CliParser::reorderCommandsByArgv(int argc, char** argv) {
 void CliParser::setupParser() {
     // Version callback
     auto printVersion = [this](std::size_t) {
-        std::cout << std::format("ptprnt version: {}\n", mVersionString);
+        fmt::print("ptprnt version: {}\n", mVersionString);
         throw CLI::CallForVersion();
     };
 

src/graphics/Label.cpp

@@ -25,7 +25,6 @@
 #include <cassert>
 #include <cstddef>
 #include <cstdint>
-#include <cstring>
 #include <memory>
 #include <string>
 #include <vector>
@@ -275,7 +274,7 @@ bool Label::append(const ILabel& other, uint32_t spacingPx) {
     int newStride          = mCairoWrapper->cairo_image_surface_get_stride(newSurface.get());
 
     // Clear the new surface (set to transparent/white)
-    memset(newData, 0x00, newStride * height);
+    std::memset(newData, 0x00, newStride * height);
 
     // Copy current label data
     for (int y = 0; y < height; ++y) {

subprojects/spdlog.wrap

@@ -1,13 +0,0 @@
-[wrap-file]
-directory = spdlog-1.15.3
-source_url = https://github.com/gabime/spdlog/archive/refs/tags/v1.15.3.tar.gz
-source_filename = spdlog-1.15.3.tar.gz
-source_hash = 15a04e69c222eb6c01094b5c7ff8a249b36bb22788d72519646fb85feb267e67
-source_fallback_url = https://github.com/mesonbuild/wrapdb/releases/download/spdlog_1.15.3-5/spdlog-1.15.3.tar.gz
-patch_filename = spdlog_1.15.3-5_patch.zip
-patch_url = https://wrapdb.mesonbuild.com/v2/spdlog_1.15.3-5/get_patch
-patch_hash = 5e0eaf0002ff589cd8dac58e1b38c297422e7a0404d7d47ff0d2e285ed18169c
-wrapdb_version = 1.15.3-5
-
-[provide]
-dependency_names = spdlog

tests/meson.build

@@ -1,29 +1,51 @@
-# Consolidated test binary - all tests in one executable for faster linking
-
-test_sources = [
-    # Test files
-    'bitmap_test/bitmap_test.cpp',
-    'monochrome_test/monochrome_test.cpp',
-    'label_test/label_test.cpp',
-
-    # Source files under test
-    '../src/graphics/Bitmap.cpp',
-    '../src/graphics/Monochrome.cpp',
-    '../src/graphics/Label.cpp',
+tests = [
+    [
+        'bitmap_test',
+        'bitmap_test_exe',
+        ['../src/graphics/Bitmap.cpp', 'bitmap_test/bitmap_test.cpp'],
+    ],
+    [
+        'monochrome_test',
+        'monochrome_test_exe',
+        [
+            '../src/graphics/Monochrome.cpp',
+            'monochrome_test/monochrome_test.cpp',
+        ],
+    ],
 ]
 
-test_exe = executable(
-    'ptprnt_tests',
-    sources: test_sources,
-    include_directories: incdir,
-    dependencies: [
-        gmock_dep,  # GMock includes GTest
-        usb_dep,
-        log_dep,
-        pangocairo_dep,
-        cli11_dep,
-    ],
-)
+foreach test : tests
+    test(
+        test.get(0),
+        executable(
+            test.get(1),
+            sources: test.get(2),
+            include_directories: incdir,
+            dependencies: [
+                gtest_dep,
+                usb_dep,
+                log_dep,
+                pangocairo_dep,
+                cli11_dep,
+            ],
+        ),
+    )
+endforeach
 
-# Single test that runs all test suites
-test('all_tests', test_exe)
+# Label test requires GMock for mocking Cairo/Pango
+test(
+    'label_test',
+    executable(
+        'label_test_exe',
+        sources: ['../src/graphics/Label.cpp', 'label_test/label_test.cpp'],
+        include_directories: incdir,
+        dependencies: [
+            gmock_dep,
+            gtest_dep,
+            usb_dep,
+            log_dep,
+            pangocairo_dep,
+            cli11_dep,
+        ],
+    ),
+)